MY SEARCH ENGINE

Wednesday, December 22, 2010

NASA's Next Mars Rover to Zap Rocks With Laser

MEDIA RELATIONS OFFICE
JET PROPULSION LABORATORY
CALIFORNIA INSTITUTE OF TECHNOLOGY
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
PASADENA, CALIF. 91109 TELEPHONE 818-354-5011
http://www.jpl.nasa.gov

Guy Webster 818-354-6278
Jet Propulsion Laboratory, Pasadena, Calif.
Guy.webster@jpl.nasa.gov

Feature: 2010-428 Dec. 22, 2010

NASA's Next Mars Rover to Zap Rocks With Laser

The full version of this story with accompanying images is at:
http://www.jpl.nasa.gov/news/news.cfm?release=2010-428&cid=release_2010-428

A rock-zapping laser instrument on NASA's next Mars rover has roots in a demonstration that
Roger Wiens saw 13 years ago in a colleague's room at Los Alamos National Laboratory in New
Mexico.

The Chemistry and Camera (ChemCam) instrument on the rover Curiosity can hit rocks with a
laser powerful enough to excite a pinhead-size spot into a glowing, ionized gas. ChemCam then
observes the flash through a telescope and analyzes the spectrum of light to identify the chemical
elements in the target.

That information about rocks or patches of soil up to about 7 meters (23 feet) away will help the
rover team survey the rover's surroundings and choose which targets to drill into, or scoop up, for
additional analysis by other instruments on Curiosity. With the 10 science instruments on the
rover, the team will assess whether any environments in the landing area have been favorable for
microbial life and for preserving evidence about whether life existed. In late 2011, NASA will
launch Curiosity and the other parts of the flight system, delivering the rover to the surface of
Mars in August 2012.

Wiens, a geochemist with the U.S. Department of Energy's Los Alamos National Laboratory,
serves as ChemCam's principal investigator. An American and French team that he leads
proposed the instrument during NASA's 2004 open competition for participation in the Mars
Science Laboratory project, whose rover has since been named Curiosity.

In 1997, while working on an idea for using lasers to investigate the moon, Wiens visited a
chemistry laboratory building where a colleague, Dave Cremers, had been experimenting with a
different laser technique. Cremers set up a cigar-size laser powered by a little 9-volt radio battery
and pointed at a rock across the room.

"The room was well used. Every flat surface was covered with instruments, lenses or optical
mounts," Wiens recalls. "The filing cabinets looked like they had a bad case of acne. I found out
later that they were used for laser target practice."

Cremers pressed a button. An invisible beam from the laser set off a flash on a rock across the
room. The flash was ionized gas, or plasma, generated by the energy from the laser exciting
atoms in the rock. A spectrometer pointed at the glowing plasma recorded the intensity of light at
different wavelengths for determining the rock's atomic ingredients.

Researchers have used lasers for inducing plasmas for decades. What impressed Wiens in this
demonstration was the capability to do it with such a low-voltage power source and compact
hardware. Using this technology for a robot on another planet seemed feasible. From that point,
more than a decade of international development and testing resulted in ChemCam being
installed on Curiosity in September 2010.

The international collaboration came about in 2001 when Wiens introduced a former Los Alamos
post-doctoral researcher, Sylvestre Maurice, to the project. The core technology of ChemCam,
laser-induced breakdown spectroscopy, had been used for years in France as well as in America,
but it was still unknown to space scientists there. "The technique is both flashy and very
compelling scientifically, and the reviewers in France really liked that combination," Maurice
said. A French team was formed, and work on a new laser began.

"The trick is very short bursts of the laser," Wiens said. "You really dump a lot of energy onto a
small spot -- megawatts per square millimeter -- but just for a few nanoseconds."

The pinhead-size spot hit by ChemCam's laser gets as much power focused on it as a million light
bulbs, for five one-billionths of a second. Light from the resulting flash comes back to ChemCam
through the instrument's telescope, mounted beside the laser high on the rover's camera mast. The
telescope directs the light down an optical fiber to three spectrometers inside the rover. The
spectrometers record intensity at 6,144 different wavelengths of ultraviolet, visible and infrared
light. Different chemical elements in the target emit light at different wavelengths.

If the rock has a coating of dust or a weathered rind, multiple shots from the laser can remove
those layers to provide a clear shot to the rock's interior composition. "We can see what the
progression of composition looks like as we get a little bit deeper with each shot," Wiens said.

Earlier Mars rover missions have lacked a way to identify some of the lighter elements, such as
carbon, oxygen, hydrogen, lithium and boron, which can be clues to past environmental
conditions in which the rock was formed or altered. After NASA's Mars Exploration Rover
Spirit examined an outcrop called "Comanche" in 2005, it took years of analyzing indirect
evidence before the team could confidently infer the presence of carbon in the rock. A single
observation with ChemCam could detect carbon directly.

ChemCam will be able to interrogate multiple targets the same day, gaining information for the
rover team's careful selection of where to drill or scoop samples for laboratory investigations that
will take multiple days per target. It can also check the composition of targets inaccessible to the
rover's other instruments, such as rock faces beyond the reach of Curiosity's arm.

The instrument's telescope doubles as the optics for the camera part of ChemCam, which records
images on a one-megapixel detector. The telescopic camera will show context of the spots hit
with the laser and can also be used independently of the laser.

The French half of the ChemCam team, headed by Maurice and funded by France's national
space agency, provided the instrument's laser and telescope. Maurice is a spectroscopy expert
with the Centre d'Étude Spatiale des Rayonnements, in Toulouse, France. Los Alamos National
Laboratory supplied the spectrometers and data processor inside the rover. The optical design of
the spectrometers came from Ocean Optics, Dunedin, Fla.

The ChemCam team includes experts in mineralogy, geology, astrobiology and other fields, with
some members also on other Curiosity instrument teams.

With the instrument now installed on Curiosity, testing continues at NASA's Jet Propulsion
Laboratory, Pasadena, Calif. JPL, a division of the California Institute of Technology in
Pasadena, is assembling the rover and other components of the Mars Science Laboratory flight
system for launch from Florida between Nov. 25 and Dec. 18, 2011.

-end-


To remove yourself from this mailing, please go to http://www.kintera.org/TR.asp?a=nvLZLdMTLjKYLmI&s=kkL2L7NNKgLOI6OTJuG&m=brJOK1PHLjJPK8K

To remove yourself from all mailings from NASA Jet Propulsion Laboratory, please go to http://www.kintera.org/TR.asp?a=geJLISNrFcJLJ2K&s=kkL2L7NNKgLOI6OTJuG&m=brJOK1PHLjJPK8K

No comments: